please help, Ex bulb size

[Akuma]

anyone know Ex bulb size of Ex? H1 H4 or H7....

[xspace]

anyone know Ex bulb size of Ex? H1 H4 or H7....

Bro, I read somewhere. All the bulb sizes are in the Lancer manual, prolly you want to check it out first?

[ikarus]

foglight is HB11 :) Juz bot ....

think other 2 is HB3,hb4..... EX using all small bulb..not H de..

[teozifuedwin]

9005 and 9006 a.k.a HB3 and HB4

[quen]

For Lancer EX:

Front:

Front turn signal light: 21watts bulb: WY21W
Head light, high beam: 60watts bulb: 9005 HB3
Head light, low beam: (halogen bulb) 51watts bulb: 9006 HB4
front foglight: 55watts bulb: H11
Front side marker and parking light: 5watts bulb: WY5W
Side turn signal light: 5watts bulb: W5W

Rear:

License plate: 5watts bulb: W5W
back up light: 21watts bulb: 7440
tail light: 5watts bulb: W5W
tail and stop light: 21/5watts bulb 7443
rear turn signal: 21watts bulb: 7440
rear sidemarker: 5watts bulb: W5W

Btw, I am the one selling Osram bulbs......

[Akuma]

thank you very much for the info....

[kevpang]

Upz for bro quen.
Bro akuma...u might want to refer to ur manual...it contain alot of useful information.

[quen]

thank you very much for the info....


No prob.... just contributing my knowledge.... thou it can be found in the manual ;)

[ikarus]

9005 and 9006 a.k.a HB3 and HB4

Oh thankz bro....hehe...i didn't noe that actually...:clap:
i so scare buy wrong de....

but hor...if normal beam use HID....High beam i used White Halogen blub...can bo ar ? i scare halogen hot....affect the HID beside..

[quen]

As long the HID and halogen is housed separately in different housing, then no issue. Just take note that HID is illegal....

[noa_higs]

Hi guys i was searching for some information on white bulbs on LMC and didn't want to start a new thread so just continuing on from here:

Basically i just wanna change to bulbs that are less yellow than stock and i don't wanna convert to HID. I just have a couple of concerns which are namely that the white bulb won't have as far a throw and it blows easily.

So far, Philips crystal vision (4300K) suits my profile because i read a few reviews online that claim their bulbs provide sufficient throw and are q durable and most importantly at 4300k they are LTA friendly.

Unfortunately many other reputable brands do not offer the bulbs that match my requirements in 9006 HB4 size so i'm likely going for the philips crystal vision.

Do any of you guys know which is the cheapest place to get them? i know of Mc Well and Autobacs. Any other suggestions/good lobangs?

Oh also i read that it would be good to install a headlight relay system to preserve the life of the bulbs? Any bros here done that? good?

[noa_higs]

heh and i forgot! thanks for any help / suggestions guys!

[MCLithium]

I think Diamond Vision is slightly better. Have you checked out PIAA bulbs?

[ah_kiat]

To be exact, 4300K is not LTA friendly as the limit is 4000K. However, 4300K i think they will close one eye.

Take note that these halogen white bulbs are usually not bright enough and the throw is not very far compared to your stock yellow bulbs. So make sure you make good use of your fog lights during rainy days.


Hi guys i was searching for some information on white bulbs on LMC and didn't want to start a new thread so just continuing on from here:

Basically i just wanna change to bulbs that are less yellow than stock and i don't wanna convert to HID. I just have a couple of concerns which are namely that the white bulb won't have as far a throw and it blows easily.

So far, Philips crystal vision (4300K) suits my profile because i read a few reviews online that claim their bulbs provide sufficient throw and are q durable and most importantly at 4300k they are LTA friendly.

Unfortunately many other reputable brands do not offer the bulbs that match my requirements in 9006 HB4 size so i'm likely going for the philips crystal vision.

Do any of you guys know which is the cheapest place to get them? i know of Mc Well and Autobacs. Any other suggestions/good lobangs?

Oh also i read that it would be good to install a headlight relay system to preserve the life of the bulbs? Any bros here done that? good?

[Razor]

From what I know, all the stock lightbulb specs can be found in the manual =D

[MagicOPromotion]

and for the HIDs all you have to do is find the bulb size thats run in the fogs, im not sure what size it is off the top of my head, but then just buy a plug and play kit that is for that bulb size, put it in and shizzammm HID fogs

hope this helps man
_______
=== XRumer 5.0 Palladium (http://www.botmasternet.com) RULEZ! ===

[insomic]

But 2L lancer already comes with HID.... is it illegal? Doesn't make sense.....